How to crimp the RJ45 connectors to a network cable – by Mr Tam

How to crimp the RJ45 connectors to a network cable – by Mr Tam


hello everyone welcome back to my video
Channel. Today in this video I will show you guys how to make a complete the
network cable within the two connectors RJ45 and before we start doing it, so I would like to show you a couple of things we need to repair for
the job. Okay so let have a look at this this is a very important (thing), we need
this tool for doing the job, and we also need the connector RJ45 and also the
the network cable, and this is also a very important (thing) this is the cable tester
for after we making the network cable we have to test to check if
it’s correct or we do something wrong, but don’t worry if you don’t have this
tool, we can test the cable by plug it direct from the moderm and
the other connector to your computer, to check and (go to) you use the web
browser to check if you can go to the internet or not. Ok and for this
image this is type B of how we make the network cable, ok I
will tell you later for this I want to remind you
that if you finish the cable like this so this is a good made, and if you finish like the cover of the wire is out of the connector or like this so this
is like a poorly made. Okay so we begin the job now, so this is the tool and
this is the cable, ok so this is how we make it put the cable insert the
cable into this and you spin the wire to take the wire away. okay and to make you easy to understand I use the word to make it
clear clean okay cut it off like this of course except the four pairs of
cable color. okay so after cleaning this so just focus on four
pairs for the type B of the network cable we start the first
position is the white-orange and the next is the the orange make it smooth
like this and hold it tightly the third position is the
white-green, okay do the same thing next is blue for every color
you need to reshape to make it (fix) and hold it tight like this. The next is
white-blue, next one is green, next is white-brown and the last one is brown, so
remember: white-orange->orange->white green->->blue->white-blue->green->white-brown->brown.
okay so finally just reshape it like this to make it easy to insert into
the RJ45 connector like (this). okay so we (after) make sure that this straight like
this and we started to cut it off okay after cut it off just remember
hold it tightly and we started to insert it carefully insert it into the RJ45
connector, (you need) you can make it a little strong. okay so finally
we insert it to this and start pressing, crimping I’ve told you in the first like you
can see that the the blue cover is inside the RJ45 connector like this and
finally we test it, we use the cable tester to test if it work or not like
this and we turn the cable tester on and we
have eight pin over here and over here and while testing you
check if the same number blink in the same time.
okay so you count it from one to eight and if like this so you have made a good cable .okay so this is the way we make the complete network cable I hope that in this video. After watching this video you have some
ideas for doing things like this. Thank you and see you in the next video ok

Danny Hutson

Leave a Reply

Your email address will not be published. Required fields are marked *